Raindrip
Compression Elbow, 1/2-in.
Description
Create a 90-degree turn in your drip system using the 1/2 in. Compression Elbow. The El fitting joins two sections of 1/2 in. supply tubing or dripline at an angle to prevent kinking. Insert tubing inside the compression ring, where a barb compresses the tube to create a watertight connection. Attach by rocking the tubing back and forth while applying pressure; for tough tubing, soak in hot water or leave out in the sun to make it more pliable. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
- Adds a 90-degree turn in your 1/2 in. supply tubing or dripline; Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
- Fits 1/2 in. tubing and dripline with outside diameter of 0.620 in.
- Rock the end of tubing back and forth while pushing it into the compression fitting, where an internal barb will compress the tube to hold it in place; for rigid tubing, consider soaking the tube end in hot water or leaving out in the sun; Creates a water
- Compression ring is color-coded for easy identification: blue fits 0.710 in. tubing with 0.710 in. OD; black fits 5/8 in. tubing with 0.700 in. OD; green fits 1/2 in. tubing with 0.620 in. OD; Handles water pressures up to 50 psi
- Comes with one 1/2 in. Compression Elbow; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling